Danby DER2009W 用户手册
OPERATING POSITION
Be sure to provide all adequate clearances and dimensions before moving range into final location.
Carefully slide range into final position while inserting rear leveling leg into and fully engaging the anti-tip bracket. Make sure
the power cord folds into the remaining area behind the range storage drawer. Be sure to check the level of the range.
Carefully slide range into final position while inserting rear leveling leg into and fully engaging the anti-tip bracket. Make sure
the power cord folds into the remaining area behind the range storage drawer. Be sure to check the level of the range.
OPERATION CHECKLIST
Turn on one of the surface units to observe that the element and indicator light glow. Turn the unit off when glow is detected.
Recheck the range wiring connections.
If range does not operate:
• Check that the circuit breaker is not tripped or the house fuse blown.
• Check that the power supply cord is plugged into outlet.
• See Use and Care Manual for troubleshooting list.
Recheck the range wiring connections.
If range does not operate:
• Check that the circuit breaker is not tripped or the house fuse blown.
• Check that the power supply cord is plugged into outlet.
• See Use and Care Manual for troubleshooting list.