Furuno 1734C 服务手册

6. DATA TRANSFER 

Data (track, marks, lines, waypoints, routes and setting data) can be loaded from a memory 
card and displayed on the screen. This feature is useful for observing past data and setting 
up the equipment for a specific purpose with “setting data.” 
 
1. Press the MENU key followed by the SYSTEM CONFIGURATION and DATA 

TRANSFER soft keys. 

2.  Press the UPLOAD/DOWNLOAD DATA soft key. 
3.  Press the LOAD DATA IN MEMORY CARD soft key to show the LOAD DATA menu. 

TRACKS

OFF

MARKS & LINES 

OFF

WAYPOINTS & ROUTES

OFF

SETTING DATA*

OFF

WALLPAPER

OFF

▲

EDIT

LOAD

RETURN

* = Plotter data only

4. Use the cursor pad to select item to load. 
5.  Press the EDIT soft key. (The EDIT soft key is inoperative when no memory card is 

inserted or there is no data in the memory card.) 

6. Use the cursor pad to select ON. (Select OFF not to load selected data.) Press the 

ENTER soft key. If the memory card does not contain the item selected, the unit beeps 
and ON cannot be selected. 

7.  After selecting all items desired, press the LOAD soft key, then press the ENTER knob. 

The message “NOW LOADING FROM MEMORY CARD.” appears. 

8.  After loading is completed, the message “COMPLETED LOADING DATA. PUSH 

ENTER KNOB TO CONTINUE.” appears. Push the ENTER knob to continue. 

 

 Since loaded track data is added to internal track, oldest track will be erased when 

the track memory capacity is exceeded. 
Waypoints & routes:

 The loaded data replaces like stored data. 

: The loaded data is added to internal data. When the mark/line memory 

becomes full no marks may be entered. 
Setting data:

 The loaded data replaces current configuration settings. If the memory card 

contents could not be loaded, push the ENTER knob to restart with default settings. Note 
that track memory capacity is not saved or loaded. To use loaded setting data, turn the 
power off and on again. 
Wallpaper:

 Load desired wallpaper.