ICOM IC-7000 用户手册
56
4
RECEIVE AND TRANSMIT
4
DPre-setting for using RTTY terminal or TNC
When using your RTTY terminal or TNC, consult the
manual that comes with the RTTY terminal or TNC.
manual that comes with the RTTY terminal or TNC.
Mark frequency
qPush [MODE] momentarily to select RTTY mode.
qPush [MODE] momentarily to select RTTY mode.
• After RTTY mode is selected, push
[MODE] for 1 sec.
to toggle between RTTY and RTTY-R modes.
wPush [AF(
SET
)] momentarily to enter the set mode
menu.
ePush [F-1 QS] to enter the quick set mode.
rPush [F-1 Y] or [F-2 Z] to select “RTTY Mark
Frequency.”
tRotate [DIAL] to select the desired frequency.
• Push
[F-4 DEF] for 1 sec. to select the default fre-
quency.
Shift width
qEnter the quick set mode as same as above.
qEnter the quick set mode as same as above.
wPush [F-1 Y] or [F-2 Z] to select “RTTY Shift
Width.”
eRotate [DIAL] to select the desired shift width.
• Push
[F-4 DEF] for 1 sec. to select the default shift
width.
RTTY keying polarity
qEnter the quick set mode as same as above.
qEnter the quick set mode as same as above.
wPush [F-1 Y] or [F-2 Z] to select “RTTY key-
ing Polarity.”
eRotate [DIAL] to select the desired keying polarity.
• Push
[F-4 DEF] for 1 sec. to select the default polarity.
After Pre-setting is finished, push
[
Z(
MENU
/
GRP
)] mo-
mentarily twice to return the normal operating mode.
RTTY keying is set to
‘normal’. (default)
normal :
key open=mark
key close=space
reverse:
key open=space
key close=mark
‘normal’. (default)
normal :
key open=mark
key close=space
reverse:
key open=space
key close=mark
RTTY shift width is
set to 170 Hz.
(default)
set to 170 Hz.
(default)
170/200/425 Hz are
available.
available.
RTTY mark frequency
is set to 2125 Hz.
(default)
is set to 2125 Hz.
(default)
2125, 1615 and 1275
Hz are available.
Hz are available.
[MODE]
[AF]
[MENU/GRP] [F-1] [F-2] [F-4]
[DIAL]