ICOM IC-7000 用户手册

59

4

RECEIVE AND TRANSMIT

■ Operating FM

qPush [

Y(

)]/[

Z(

)] to select the desired

band or push a band key on the HM-151.

wPush [MODE] momentarily or push and hold for 1

sec. to select FM mode.

• After FM, WFM or AM mode is selected, push 

for 1 sec. to select from FM, WFM and AM modes.

eRotate [DIAL] to tune in a desired signal.

• The S-meter indicates received signal strength when a

signal is received.

• The default tuning step for FM mode is 1 kHz; this can

be changed using the tuning step program mode. (p. 30)

rRotate [AF] to set audio to a comfortable listening

level.

tPush [PTT] (microphone) to transmit.

•

[TX] indicator lights red.

ySpeak into the microphone at your normal voice

level.

• Adjust ‘MIC Gain’ at this step, if necessary. (p. 38)

uRelease [PTT] (microphone) to return to receive.

“FM” appears

[

Y]

[

Z]

[DIAL]

[MODE]

[AF]

[TX] indicator

DConvenient functions for receive

• Preamp and attenuator (p. 74)

➥ Push [P.AMP/ATT] momentarily to turn the pre-

amp ON or OFF.

• “

” appears when the preamp is set to ON.

➥ Push [P.AMP/ATT] for 1 sec. to turn the attenua-

tor ON.

• Push

[P.AMP/ATT] momentarily to turn the attenuator

OFF.

• “

” appears when the attenuator is set to ON.

• Auto notch filter (p. 82)

➥ Push [ANF/•REC] to turn the auto notch filter ON

and OFF.

• “

” appears when the auto notch filter is set to ON.

• DSP noise reduction (p. 81)

➥ Push [NR/LEV] to turn the DSP noise reduction

ON and OFF.

• “

” appears when the DSP noise reduction is set to

ON.

➥ Push [NR/LEV] for 1 sec. to enter the noise re-

duction level set mode, then rotate 

[DIAL] to ad-

just the DSP noise reduction level.

• VSC (voice squelch control) (p. 84)

➥ While “S-1” is selected, push [F-4 VSC] to turn

the VSC function ON and OFF.

• “

” appears when VSC function is set to ON.

DConvenient functions for transmit

• VOX (voice operated transmit) (p. 85)

➥ While “M-3” is selected, push [F-1 VOX] to turn

the VOX function ON and OFF.

• “VOX” appears when the VOX function is set to ON.

➥ While “M-3” is selected, push [F-1 VOX] for 1

sec. to enter the VOX set mode.

• Push

[F-1 ≤]/[F-2 ≥] to select an item.

• Rotate

[DIAL] to set the value/conditions.

• Transmit quality monitor (p. 89)

➥ Push [AF(

)], then [F-4 OTH] to enter the mis-

cellaneous (others) set mode. Select an item with
[F-1 ≤]/[F-2 ≥], then rotate [DIAL] to turn the
monitor function ON and OFF.

• Push and hold 

[MENU/GRP] for 1 sec. once or twice

to select the menu group M.

• Push

[MENU/GRP] momentarily one or more times

to select the menu M-3.