ICOM IC-7000 用户手册

67

4

RECEIVE AND TRANSMIT

A 1750 Hz tone is required to access most European
repeaters.

➥While pushing [PTT], push [F-3 TON] in the M-3

menu during repeater operation. (pgs. 63, 66)

Popup indication 
appears.

[MENU/GRP]

[F-3]

■1750 Hz tone burst

To transmit a DTMF code using a DTMF send menu,
program the desired code in advance as described on
next page.

qSelect FM mode with [MODE].

wSelect S-1.

ePush [F-2 DTM] to enter the DTMF send menu.

• If the DTMF root menu appears, push 

[F-1 SND]. The

DTMF starting menu can be changed in the miscella-
neous (others) set mode (see p.136).

rPush [F-1 D1] — [F-4 D4] to transmit the DTMF

code.

• “D1”– “D4” are highlighted while transmitting.
• Set the DTMF speed from 100–500 msec. (100 msec.

steps). See next page for DTMF set mode.

tPush [Z(

)] twice to exit DTMF send

menu and return to the normal FM mode display.

• Push and hold 

[MENU/GRP] for 1 sec. once or twice

to select the menu group S.

• Push

[MENU/GRP] momentarily one or more times to

select the menu S-1.

DTMF code 
sequence

[MODE]

[MENU/GRP]

[F-1]

[F-2] [F-3] [F-4]

DDTMF send menu

■ DTMF memory encoder

DTMF tones are used for autopatching, controlling
other equipment, etc. The transceiver has 4 DTMF
memory channels (D1–D4) for storage of often-used
DTMF codes sequence of up to 24 digits.