Kawasaki STX-15F 用户手册
FUEL SYSTEM (DFI) 3-67
Throttle Lever, Cable and Case
•
Tighten:
Torque - Throttle Case Mounting Screws: 3.9 N·m (0.40
kgf·m, 34 in·lb)
•
Swing the throttle lever so that the throttle valve is fully
open.
open.
WARNING
Operation with an improperly assembled throttle
case could result in an unsafe riding condition.
case could result in an unsafe riding condition.
•
Adjust the throttle cable (see Throttle Cable Adjustment).
Throttle Cable Removal
•
Remove the engine hood (see Hull/Engine Hood chap-
ter).
ter).
•
Remove the band [A] on the delivery pipe [B]
•
Disconnect the throttle cable from the body assy.
○
Slide out the rubber cap.
○
Unscrew the adjuster locknut [A] and slide the cable from
the bracket.
the bracket.
○
Slide the tip [A] of the cable lower end from the throttle
pivot arm.
pivot arm.
•
Unscrew the mounting screws [A] and remove the han-
dlebar pad [B].
dlebar pad [B].
•
Take out the inner pad