Kawasaki STX-15F 用户手册
11-8 PUMP AND IMPELLER
Pump and Impeller
•
Be sure trim seal [A] is in place.
•
Grease the splines on the drive shaft with water resistant
grease.
grease.
•
Install the pump.
○
Apply a non-permanent locking agent to the pump mount-
ing bolts and torque them.
ing bolts and torque them.
Torque - Pump Mounting Bolts: 36 N·m (3.7 kgf·m, 27 ft·lb)
•
Install the grate [A].
○
Be sure the trim seals [B] are in the position.
○
Apply a non-permanent locking agent to the grate mount-
ing bolts and torque them.
ing bolts and torque them.
Torque - Grate Mounting Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb)