Kawasaki STX-15F 用户手册
PERIODIC MAINTENANCE 2-23
Periodic Maintenance Procedures
Steering Shaft [B]
Hull/Engine Hood
Drain Plug Inspection
•
Check the drain plugs [A] for cracks or damage and the
drain plug mounting screws [B] are tightened securely.
drain plug mounting screws [B] are tightened securely.
•
Check the seals [C] for damage.
If necessary, replace the drain plugs or seals.
If necessary, replace the drain plugs or seals.
Electrical System
Battery Charging Condition Inspection
Battery charging condition can be checked by measuring
battery terminal voltage.
•
Disconnect the battery terminal leads (see Battery Re-
moval in Electrical System chapter).
moval in Electrical System chapter).
CAUTION
Be sure to disconnect the negative terminal lead
first.
first.
•
Measure the battery terminal voltage.
NOTE
○
Measure with a digital voltmeter [A] which can be read
one decimal place voltage.
one decimal place voltage.
If the reading is below the specified, refreshing charge
is required (see Refreshing Charge in Electrical System
chapter).
is required (see Refreshing Charge in Electrical System
chapter).
Battery Terminal Voltage
Standard:
12.6 V or more
•
Connect the battery leads, positive first.
Battery Terminals Inspection
•
Check the battery terminal screws [A] for tightness and
make sure terminal covers are in place.
make sure terminal covers are in place.
WARNING
Loose battery cables can create sparks which can
cause a fire or explosion resulting in injury or death.
Make sure the battery terminal screws are tightened
securely and the covers are installed over the termi-
nals.
cause a fire or explosion resulting in injury or death.
Make sure the battery terminal screws are tightened
securely and the covers are installed over the termi-
nals.