Kawasaki STX-15F 用户手册
FUEL SYSTEM (DFI) 3-27
Throttle Sensor (Service Code/Character-11/tPS)
Throttle Sensor Removal/Adjustment
CAUTION
Never drop the throttle sensor [A], especially on a
hard surface. Such a shock to the sensor can dam-
age it.
hard surface. Such a shock to the sensor can dam-
age it.
•
Remove:
Seat (see Hull/Engine Hood chapter)
Air filter (see air Filter Removal)
Seat (see Hull/Engine Hood chapter)
Air filter (see air Filter Removal)
•
Use a Torx wrench [A] (T20, B = 3.86 mm (0.152 in.)) to
remove the throttle sensor mounting screws [C].
remove the throttle sensor mounting screws [C].
NOTE
○
In the engine compartment, there is not enough space
between the throttle sensor and hull to remove the Torx
screws. So use an L shape Torx wrench.
between the throttle sensor and hull to remove the Torx
screws. So use an L shape Torx wrench.
•
When installing the throttle sensor, note the following (In
the photo, the throttle sensor has been removed from the
throttle body for clarity).
the photo, the throttle sensor has been removed from the
throttle body for clarity).
○
Align [A] the projections [B] on the throttle sensor with the
throttle shaft [C] as shown when putting the throttle sensor
to the throttle body.
throttle shaft [C] as shown when putting the throttle sensor
to the throttle body.
○
Turn the throttle sensor counterclockwise [A] a little and
temporarily tighten the throttle sensor mounting screws.
temporarily tighten the throttle sensor mounting screws.