Kawasaki STX-15F 用户手册
FUEL SYSTEM (DFI) 3-39
Water Temperature Sensor (Service Code/Character-14/AqUt)
Water Temperature Sensor Removal/Installation
CAUTION
Never drop the sensor, especially on a hard surface.
Such a shock to the sensor can damage it.
Such a shock to the sensor can damage it.
•
Disconnect the sensor connector [A], and unscrew the
water temperature sensor [B].
water temperature sensor [B].
•
When installing the water temperature sensor, remove the
exhaust manifold for the engine oil filling in the hollow of
the exhaust manifold.
exhaust manifold for the engine oil filling in the hollow of
the exhaust manifold.
•
Fill the hollow of the exhaust manifold [A] with the engine
oil (10W-30) [B] as shown, before installing the water tem-
perature sensor [C].
oil (10W-30) [B] as shown, before installing the water tem-
perature sensor [C].
[D] 5 mm (0.2 in.)
•
Tighten:
Torque - Water Temperature Sensor: 15 N·m (1.5 kgf·m, 11
ft·lb)
Output Voltage Inspection
NOTE
○
Be sure the battery is fully charged.
•
Remove the ECU (see ECU Removal). Do not disconnect
the connector.
the connector.