Garmin Flight Deck 100 用户手册
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
190-00728-04 Rev. A
380
HAZARD AVOIDANCE
TAWS-B information can be displayed on the following maps:
• PFD Inset Navigation Map
• Navigation Map Page
• TAWS-B Page
• Trip Planning Page
• Flight Plan Pages
Displaying terrain and obstacle information (maps except the TAWS-B Page or PFD Inset Navigation
Map):
Map):
1)
Press the MAP Softkey.
2)
Press the TERRAIN Softkey to display terrain and obstacle data.
Displaying terrain and obstacle information on the PFD Inset Navigation Map:
1)
On the PFD, press the INSET Softkey (in non-TCAS II installations) or the TRFC/MAP Softkey (TCAS II
installations).
installations).
2)
If the PFD Inset Map is showing the traffic map, press the TFRC-2 Softkey to display the navigation map.
3)
Press the TERRAIN Softkey to display terrain and obstacle data.
When TAWS-B is selected on MFD maps other than the TAWS-B Page, an icon to indicate the feature is
enabled for display and a legend for TAWS-B terrain colors are shown (Figure 6-71).
Figure 6-71 TAWS-B Icon and Legend
The Navigation Map Page Setup Menu provides a means in addition to the softkey for enabling/disabling
display of terrain and obstacles. The setup menu also controls the map range settings above which terrain and
obstacle data are decluttered from the display. If a map range larger than the map range setting is selected, the
data is removed from the map. For terrain data, the enable/disable function applies only to the MFD, while the
range setting also affects the PFD Inset Map.
obstacle data are decluttered from the display. If a map range larger than the map range setting is selected, the
data is removed from the map. For terrain data, the enable/disable function applies only to the MFD, while the
range setting also affects the PFD Inset Map.
Terrain data can be selected for display independently of obstacle data; however, obstacles for which warnings
and cautions are issued are shown when terrain is selected for display and the map range is within the setting
limit.
limit.
Maps besides the TAWS-B Page use settings based on those selected for the Navigation Map Page. The
maximum display ranges for obstacles on each map are dependent on the range setting made for the Navigation
Map. If the maximum range for obstacle display on the Navigation Map is adjusted to below 20 nm, the highest
obstacle display range settings on the other applicable maps are also adjusted proportionally.
Map. If the maximum range for obstacle display on the Navigation Map is adjusted to below 20 nm, the highest
obstacle display range settings on the other applicable maps are also adjusted proportionally.