Garmin Flight Deck 100 用户手册

190-00728-04  Rev. A

534

The ChartView database is revised every 14 days. Charts are still viewable during a period that extends from

the cycle expiration date to the disables date. ChartView is disabled 70 days after the expiration date and is no
longer available for viewing. After the expiration date, the ChartView database is no longer current, however,
data displayed on the actual charts may still be current. When viewing charts after the ChartView database has
expired, ensure the displayed chart is current before using.

When turning on the system, the Power-up Page displays the current status of the ChartView database. See

the table below for the various ChartView Power-up Page displays and the definition of each.

Blank Line. system is not configured for ChartView.  Contact a Garmin-
authorized service center for configuration.
System is configured for ChartView but no chart database is installed.  
Contact Jeppesen for a ChartView database.
Normal operation.  ChartView database is valid and within current 
cycle.
ChartView database is within 1 week after expiration date.  A new cycle 
is available for update.
ChartView database is beyond 1 week after expiration date, but still 
within the 70 day viewing period.
ChartView database has timed out.  Database is beyond 70 days after 
expiration date.  ChartView database is no longer available for viewing.
System time is not available.  GPS satellite data is unknown or the 
system has not yet locked onto satellites.  Check database cycle number 
for effectivity.
System is verifying chart database when new cycle is installed for the 
first time.
After verifying, chart database is found to be corrupt.  ChartView is not 
available.