Garmin Flight Deck 100 用户手册

190-00728-04  Rev. A

539

When a chart is not available by selecting the SHW CHRT Softkey or selecting a Page Menu Option, charts

may be obtained for other airports from the WPT Pages or Flight Plan Pages.

If a chart is available for the destination airport, or the airport selected in the active flight plan, the chart

appears on the screen. When no flight plan is active, or when not flying to a direct-to destination, selecting the
SHW CHRT Softkey displays the chart for the nearest airport, if available.

The chart shown is one associated with the WPT – Airport Information page. Usually this is the airport runway

diagram. Where no runway diagram exists, but Take Off Minimums or Alternate Minimums are available, that
page appears. If Airport Information pages are unavailable, the Approach Chart for the airport is shown.

While viewing the Navigation Map Page, Flight Plan Page, or Nearest Airports Page, select the SHW CHRT 
Softkey.  The airport diagram or approach chart is displayed on the Airport Information Page.

Press the FMS Knob to activate the cursor.

Turn the large FMS Knob to select either the Airport Identifier Box or the Approach Box.  (Select the APR Softkey 
if the Approach Box is not currently shown).

Turn the small and large FMS Knob to enter the desired airport identifier.

Press the ENT Key to complete the airport selection.

Turn the large FMS Knob to select the Approach Box.

Turn the small

FMS Knob to show the approach chart selection choices.

Turn either FMS Knob to scroll through the available charts.

Press the ENT Key to complete the chart selection.