Garmin Flight Deck 100 用户手册
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
190-00728-04 Rev. A
70
FLIGHT INSTRUMENTS
A Baro Transition Alert is provided to notify the pilot to change the barometric pressure setting when crossing
the baro transition altitude. If the aircraft is at least 500 feet below the transition altitude and then climbs
through this altitude and the STD BARO Softkey has not been pressed, the barometric pressure setting flashes
in light blue until the pressure setting is changed. If the aircraft is at least 500 feet above the transition altitude
and then descends through this altitude and the barometric pressure setting has not been changed from STD
BARO, the setting flashes in light blue until it is changed.
through this altitude and the STD BARO Softkey has not been pressed, the barometric pressure setting flashes
in light blue until the pressure setting is changed. If the aircraft is at least 500 feet above the transition altitude
and then descends through this altitude and the barometric pressure setting has not been changed from STD
BARO, the setting flashes in light blue until it is changed.
Setting the Baro Transition Alert:
1)
Use the FMS Knob to select the AUX - System Setup Page on the MFD.
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight Altitude in the Baro Transition Alert box.
4)
Turn the small FMS Knob to turn the alert OFF or ON and press the ENT Key.
5)
Turn the small FMS Knob to change the desired altitude and press the ENT Key.
6)
To cancel the selection, press the FMS Knob.
Figure 2-13 Baro Transition Alert
(AUX - System Setup Page)