Garmin 20072009 用户手册

a

ppendIx

You can connect your GPSMAP 76Cx to your 

computer using either a serial port or USB connector 

cable. 

  NOTE: Fully install the supplied MapSource 

program, Trip & Waypoint Manager, on your 

computer before connecting the USB cable to the 

computer.

1.  Lift the USB protective cover from the back 

of the GPSMAP 76Cx and insert the smaller 

connector on the USB cable into the matching 

port.

2.  Connect the remaining cable end to your 

computer's USB port.

1.  Lift the Serial Port protective cover from the 

back of the GPSMAP 76Cx and insert the 

round indexed connector on the cable into the 

matching port.

2.  Connect the remaining cable end to your PC 

Serial port or other appropriate device.

3.  Set your GPSMAP 76Cx interface setting to the 

appropriate interface format. Refer to Interface 

Setup on 

.

The USB drivers should have been automatically 

installed when you installed the MapSource program 

that came with your GPSMAP 76Cx. When you 

initially connect the GPSMAP 76Cx to a USB 

port, your computer might prompt you to locate the 

destination of the drivers for the device. You only 

need to install the drivers once. After the drivers 

are installed, your computer always detects your 

GPSMAP 76Cx when it is connected. USB drivers 

might be updated periodically. You can find updates at