Precor P30 Console 用户手册

下载
页码 104
Assembling the Exercise Bike 
21
 
 
 
Making Sure the Unit Is Stable 
Make sure the unit is level before allowing anyone to use it. 
CAUTION: To eliminate movement, make sure the adjustable feet 
are in contact with the floor. 
To level the unit: 
1.
  Gently rock the unit. If there is any movement, ask your 
assistant to tip the unit to one side while you locate the 
adjustable feet. 
2.
  Correct the height of each adjustable foot as follows. 
If you want to …   Then turn the adjustable feet … 
Raise the unit  Counterclockwise 
Lower the unit  Clockwise 
ImportantPlace the unit on a flat surface. Rotating the 
adjustable feet cannot compensate for extremely uneven surfaces. 
When you are finished adjusting the unit, place the unit on the 
floor and recheck that it is level. 
 
Breaking in the Equipment 
Precor equipment does not require an actual break-in period. 
However, moving components such as belts, gears, and 
bearings can settle while the equipment is being stored or 
shipped. This can cause the equipment to operate with a 
small amount of roughness or noise when it starts up for the 
first time. 
The equipment usually returns to smooth operation after a 
day or two of normal use. If it does not, contact your dealer 
for assistance. For more information, refer to Obtaining