Roland C-230 用户手册

下载
页码 48
29
Additional Convenient Functionality <Advanced Operation>
Selecting a different ‘Others’ sound
As stated above, the C-230 provides 9 different sounds 
for the [Celesta] and [Chime] buttons. One of these 
sounds can be assigned to the button in question and 
selected simply by pressing that button. Here is how to 
assign the desired sound to an Others button:
1.
Press and hold the [Celesta] or [Chime] button for a few 
seconds (the button you press flashes).
To indicate which of the 9 sounds is selected, one of the 
CLASSIC ORGAN tilt tabs lights, while the other 8 flash.
2.
Press the lower part of the tilt tab that is assigned to the 
desired sound (see the numbers below the tilt tabs).
The tilt tab you pressed lights, while the other 8 flash. 
You can play on the keyboard to try out the selected 
sound, and select another one, if necessary.
3.
Press [Celesta] or [Chime] (depending on which one 
you pressed above) to confirm your selection.
If you don’t want to confirm your selection and revert to 
the previously selected sound, press the upper part of 
any CLASSIC ORGAN tilt tab instead.
The last sound you selected will be remembered until 
you switch off the C-230. If you want to use it each time 
you press this tab even after switching the C-230 off and 
back on again, save your settings to the Global area (see 
p. 30). Your settings can also be saved to one of the four 
memories (see p. 25).
You can also select different sounds while both the 
[Celesta] and the [Chime] button light.
Changing the volume of each 
‘Others’ sound
You can also set the volume of the newly selected sound 
(see above) to set the desired balance with respect to the 
remaining sounds.
1.
Press and hold the [Celesta] or [Chime] button for a few 
seconds (the button you press flashes).
To indicate which of the 9 sounds is selected, one of the 
“Classic Organ” tilt tabs lights, while the other 8 flash.
2.
Rotate the [Satellite Volume] knob to change the 
volume of the currently selected sound (i.e. the one 
assigned to the tilt tab that lights).
3.
Press the [Celesta] or [Chime] button you pressed in 
step (1).
The [Celesta] or [Chime] button you pressed in step (1) 
lights steadily.
The volume settings of the various “Palette” voices can 
be stored in the Global area (see p. 30). 
Choosing different Others sounds and setting their volume
CLASSIC ORGAN tilt tabs
No.
[Celesta] button
[Chime] button
3
Celesta
Chime
4
Violone 16
Holz. Gedackt 8
5
Contra Trompette 16
Dulzian 8
6
Bassoon 16
Aeoline II
7
Geigen Principal 8
Flute Celeste II 8
8
Quintadeen 8
Mixtur III
9
Mult Viols II
Cymbel III
0
Celestes III 8
Scharf II
ENTER
Unda Maris III
Voce Umana 8
Celesta
Chime
Others
Celesta
Chime
Others
C-230_e.book  Page 29  Tuesday, May 19, 2009  10:22 AM