Roland C-230 用户手册
34
Additional Convenient Functionality <Advanced Operation>
You can play back the songs stored on a USB storage device connected to the C-230. Given the possibility to work with external
USB storage devices, you might be tempted to copy Standard MIDI Files to that device (using your computer, for instance) and
play them back using the C-230.
USB storage devices, you might be tempted to copy Standard MIDI Files to that device (using your computer, for instance) and
play them back using the C-230.
The C-230 does not conform to the GS standard or General MIDI format. Songs not specifically prepared with/for the C-230 may
therefore use the wrong sounds.
therefore use the wrong sounds.
1.
Hold down the [PLAY/PAUSE] button until the
[TRUMPET] (ENTER) tilt tab starts flashing.
[TRUMPET] (ENTER) tilt tab starts flashing.
2.
Enter a number between “1” and “99” using the Classic
Organ tilt tabs.
Organ tilt tabs.
3.
Press the lower part of the [TRUMPET] (ENTER) tilt
tab to confirm your selection.
tab to confirm your selection.
The song you selected is loaded, and the tilt tabs of the
configuration used in that song light up.
configuration used in that song light up.
If you select a song number that doesn’t exist on the USB
memory stick, [STOP], [PLAY/PAUSE], and [REC] start
flashing. In that case, enter a different number and
repeat step (3) above.
memory stick, [STOP], [PLAY/PAUSE], and [REC] start
flashing. In that case, enter a different number and
repeat step (3) above.
4.
Press the [PLAY/PAUSE] button to start playback.
The [PLAY/PAUSE] button lights and playback starts.
5.
Press [PLAY/PAUSE] again to temporarily halt
playback (it flashes). Press it again to continue
playback from that point.
playback (it flashes). Press it again to continue
playback from that point.
6.
Press [STOP] to stop playback and return to the
beginning of the song.
beginning of the song.
Playing back songs on a USB memory stick
C-230_e.book Page 34 Tuesday, May 19, 2009 10:22 AM