Mitsubishi Electronics E60 用户手册

II - 15 

 

Set up the parameter of the tool (touch tool sensor), etc, used for measurement. 

8701  Tool length 

Set the length to the end of the touch tool. 

±99999.999 (mm) 

8702  Tool Dia 

Set the spherical diameter of the touch tool 
end. 

±99999.999 (mm) 

8703  OFFSET X 

Set the spindle center deviation amount from 
the touch tool center in the X axis direction. 

±99999.999 (mm) 

8704 

Y 

Set the spindle center deviation amount from 
the touch tool center in the Y axis direction. 

±99999.999 (mm) 

8705  RETURN 

Set the return distance to contact the touch tool 
against the workpiece again. 

±99999.999 (mm) 

8706  FEED 

Set the feedrate when contacting  the touch 
tool against the workpiece again. 

1 to 60000 (mm/min)