Panasonic AG-HMR10P 用户手册

27

The tally lamp turns on during recording (red).
Also, the tally lamp flashes in the following 
circumstances.
(flashes 4 times per second)

Recording error has occurred 

• 

Battery has run out

• 

SD Memory Card is full 

• 

System frequency has been changed

• 
(flashes once per second)

Remaining battery capacity is low 

• 

Remaining memory of the SD Memory Card is low

• 

Setup menu has been initialized (Page 30) 

• 

■

The tally lamp flashes in the following circumstances. 
(flashes 4 times per second)

Cooling fan is not operating correctly

• 

Internal temperature of the camera is abnormally high

• 

Recording signal is corrupted

• 

Optical Image Stabilizer is not operating correctly

• 

Problem with the focus function

• 

Camera cable is disconnected

• 

AUDIO MON/ADV

REC/
PAUSE

REC/
PAUSE

The SD Memory Card access lamp lights as 
follows depending on the access condition of the 
SD Memory Card in the portable recorder.

■

Illuminated orange:   

Reading/writing possible

Flashing orange (fast):   Verifying card/inspecting 

card for possible defects

Flashing orange (slow):   Accessing card 

(recording, playing back 
or loading)

Off:  No card inserted/unformatted or incompatible 

card inserted

■

Flashing orange (slow): Accessing card
Off: A status other than accessing

Do not perform any of the following operations 

• 

while the SD Memory Card access lamp is 
flashing.

  Performing these operations may damage the 

SD Memory Card or its contents, or cause the 
portable recorder to fail to operate correctly.

Removing the SD Memory Card

 

Switching off the power

 

Removing the battery

 

Connecting or disconnecting the USB 

 

connection cable
Shaking or striking the recorder