Motorola MTM5400 用户手册
INSTALLATION
MTM5400 Mobile Terminal Installation Manual
53
Service
The junction box PCB is not repairable. Please order a new junction box as necessary.
Connections
1.
Connect all accessories to the junction box. If it is required please see “Re-crimp Procedure”
on page 61to be able to connect your accessory.
on page 61to be able to connect your accessory.
2.
Connect the mobile-terminal-to-Junction box cable to the junction box.
3.
Connect the programming cable to the junction box (if required).
Figure 23 Connectors on the Junction Box - Front Panel
PIN 4: Use an adapter between the radio and the
accessory connector to short the ignition to ground.
Interference can cause radio to hang.
accessory connector to short the ignition to ground.
Interference can cause radio to hang.
1
2
3
7
7
6 5 4 3 2
1
6 5 4 3 2
1
1
2
3
4
5
6
7
1 = Connecting cable from Junction Box
to MTM5400 (rear side 26-pin
accessory connector) for installation
purpose only.
to MTM5400 (rear side 26-pin
accessory connector) for installation
purpose only.
PMKN4101A (length 6 m)
PMKN4102A (length 4 m)
PMKN4103A (length 2 m)
2 = Connector for accessory terminal
pin 1 SPEAKER +
pin 2 SPEAKER -
pin 3 EXT_PTT
pin 4 IGNITION SENSE
pin 5 EXT_ALARM
pin 6 EMERGENCY
pin 7
3 = Connector for visor microphone