3com Version 8.1.2 用户手册
Software Installation Procedure
23
Example
Host IP address [192.9.200.14]: 192.9.200.96
Install file pathname[/usr/cb2500/lp2500c]:
User name: scottco
Password:
Programming flash memory block 1 of 15...
Programming flash memory block 2 of 15...
Programming flash memory block 3 of 15...
.
.
Programming flash memory block 15 of 15...
Installation complete.
6 Proceed to “Rebooting the System” next.
Rebooting the System
To reboot your system, follow these steps:
1 From the top level of the Administration Console, enter:
system reboot
2 When the reboot is complete, log in to the system and proceed to
Reloading the Compressed Image
You must load the compresed image file again. Follow these steps:
1 From the top level of the Administration Console, enter:
system softwareUpdate
The system prompts you for several items of information.
Press Return at any prompt to accept the default value that is shown in
brackets.
brackets.
2 At the
Host IP address
prompt, enter the IP address of the host
device from which you are retrieving the compressed image.
3 At the
Install file pathname
prompt, enter the complete path
and filename.
Paths and filenames are case-sensitive. Be sure to type them exactly as
shown on the hard disk of the host device.
shown on the hard disk of the host device.
For an MS-DOS host, you must precede the full path with a forward
slash (/). Example:
slash (/). Example:
/c:\3com\cb2500\lp2500c
4 At the
User name
prompt, enter your user name.