3com Version 8.1.2 用户手册
8
C
ORE
B
UILDER
2500 I
NTELLIGENT
S
WITCHING
S
OFTWARE
V
ERSION
8.1.2
About Software
Version 8.1.2
Version 8.1.2
Intelligent Switching software version 8.1.2 is a maintenance release that
includes several patches (bug fixes). Table 1 lists the patch numbers and
descriptions.
includes several patches (bug fixes). Table 1 lists the patch numbers and
descriptions.
Table 1 Patch Descriptions
Patch
No.
No.
Descriptions of Fixed Problems
5
Added the ability to save nonvolatile configuration data from one system
and restore it to another system.
and restore it to another system.
Fixed a problem with the
nvdata save
process and .nvd file extensions.
6
Fixed a buffer leak problem with IPX NetBIOS in configurations that have
no outgoing interfaces.
no outgoing interfaces.
Fixed a problem in which IPX NetBIOS network numbers were corrupted
when using FDDI 802.2 encapsulation on an IPX interface. This problem
affected the processing of an IPX NetBIOS frame and potentially caused it
to be dropped.
when using FDDI 802.2 encapsulation on an IPX interface. This problem
affected the processing of an IPX NetBIOS frame and potentially caused it
to be dropped.
10
Fixed a problem with Fast Ethernet port lockups.
13
Fixed the FDDI Source Route frame problem with Panic 3 errors. Errors
were caused by frames with unicast DA, known DA, source route SA,
known SA, and frames in error.
were caused by frames with unicast DA, known DA, source route SA,
known SA, and frames in error.
Fixed a problem with multibuffer FDDI and ATM Panic 3 errors.
Fixed an error with the max VLAN condition that occurred while adding
VLANs.
VLANs.
15
Fixed the corruption problem with frames that required fragmentation
between FDDI and Ethernet.
between FDDI and Ethernet.
17
Fixed filtering problems with ATM LECs.
18
Fixed a problem in which, if an IP VLAN was removed, then the remaining
IP VLANs could no longer communicate with each other through the
system.
IP VLANs could no longer communicate with each other through the
system.
19
Fixed a problem in which AUI and BNC ports hung when a certain amount
of collision activity occurred.
of collision activity occurred.
22
Revised the fix that dealt with frame corruption during FDDI-to-Fast
Ethernet or FDDI-to-Ethernet fragmentation.
Ethernet or FDDI-to-Ethernet fragmentation.
Fixed a problem with the initialization and timing of ATM LECs.
23
Fixed a problem that occurred if an ATM multicast limit was set. If that limit
value was reached on an ATM interface, all future traffic through that
interface was dropped.
value was reached on an ATM interface, all future traffic through that
interface was dropped.
24
Fixed the Panic78 frame buffer overreturn problem that was caused by
Source Route frames in error. This fix is only for Transparent Bridge Mode.
Source Route frames in error. This fix is only for Transparent Bridge Mode.