Cisco Systems 2960 用户手册
12-23
Catalyst 2960 and 2960-S Switch Software Configuration Guide
OL-8603-09
Chapter 12 Configuring Interface Characteristics
Configuring Ethernet Interfaces
Configuring Ethernet Interfaces
These sections contain this configuration information:
•
•
•
•
•
•
•
•
•
•
Default Ethernet Interface Configuration
listed in the table, see
see
mgmt_show
Displays the statistics for the Ethernet management port.
ping host_ip_address
Sends ICMP ECHO_REQUEST packets to the specified network host.
boot tftp:/file-url ...
Loads and boots an executable image from the TFTP server and enters
the command-line interface.
the command-line interface.
For more details, see the command reference for this release.
copy tftp:/source-file-url
filesystem:/destination-file-
url
filesystem:/destination-file-
url
Copies a Cisco IOS image from the TFTP server to the specified
location.
location.
For more details, see the command reference for this release.
1.
ARP = Address Resolution Protocol.
Table 12-2
Boot Loader Commands (continued)
Command
Description
Table 12-3
Default Layer 2 Ethernet Interface Configuration
Feature
Default Setting
Allowed VLAN range
VLANs 1 to 4094.
Default VLAN (for access ports)
VLAN 1.
Native VLAN (for IEEE 802.1Q
trunks)
trunks)
VLAN 1.
VLAN trunking
Switchport mode dynamic auto (supports DTP).