Novatel OM-20000041 用户手册
C
Commands Summary
132
MiLLennium GPSCard Software Version 4.50 Command Descriptions Manual Rev 1
UNLOG
This command permits you to remove a specific log request from the system.
The [port] parameter is optional. If [port] is not specified, it is defaulted to the port that the command was received
on. This feature eliminates the need for you to know which port you are communicating on if you want logs to
come back on the same port you are sending commands on.
on. This feature eliminates the need for you to know which port you are communicating on if you want logs to
come back on the same port you are sending commands on.
Syntax:
Example:
unlog com1,posa
unlog posa
UNLOGALL
If [port] is specified (COM1 or COM2) this command disables all logs on the specified port only. All other ports
are unaffected. If [port] is not specified this command disables all logs on all ports.
are unaffected. If [port] is not specified this command disables all logs on all ports.
Syntax:
UNLOGALL [
port]
NOTE:
This command does not disable logs that have the HOLD attribute (see description for
LOG
command).
To disable logs with the HOLD attribute, use the
UNLOG
command.
UNLOG
[
port]
datatype
Syntax
Range Value
Description
Default
UNLOG
-
Command
unlogall
[port]
COM1, COM2
COMn port from which log originated
datatype
any valid log
The name of the log to be disabled