Novatel OM-20000041 用户手册

4

Message Formats

MiLLennium GPSCard Software Version 4.50 Command Descriptions Manual Rev 1

57

COM1> log com2 rinex ontime 30

(some time later - move to a new site)

COM1> log com2 xkin

COM1> rinex markernum 980.1.35

COM1> rinex antdh 3.1

(at new site)

COM1> log com2 xsta

(some time later - logging complete)

COM1> unlogall

It should be noted that the first line of this example is equivalent to these two lines:

COM1> log com2 xobs ontime 30

COM1> log com2 xnav onchanged

The use of the pseudo-log RINEX is for convenience only.

After the UNLOGALL command, the XNHD and XOHD logs are automatically generated if XNAV and XOBS,
respectively, were active.

This command is used to configure the user-defined fields in the file headers.

The settings of all these fields are visible in the 

RCCA

 log.  All settings can be saved to non-volatile memory on a

MiLLennium card by the 

SAVECONFIG

 command.  A CRESET command will empty all text fields and reduce to

zero the antenna offsets.

RINEX

cfgtype

RINEX

-

Command

cfgtype

AGENCY

Define agency name in observation log header

ANTDE

Define antenna delta east (offset to marker) in observation log and static event log

ANTDH

Define antenna delta height (offset to marker) in observation log and static event log

ANTDN

Define antenna delta north (offset to marker) in observation log and static event log

ANTNUM

Define antenna number in observation log header

ANTTYPE

Define antenna type in observation log header

COMMENT

Add comment to navigation and observation log headers (optional)

MARKNAME

Define marker name in observation log and static event log

MARKERNUM

Define marker number in observation log (optional) and static event log

OBSERVER

Define observer name in observation log header

RECNUM

Define receiver number in observation log header