Pioneer VSX-AX5i-G 用户手册

En

All the terminals on the back panel are explained and/or referenced here.

4-pin, S400 i.LINK connectors for connection to 
i.LINK-equipped players and other components. 
Each i.LINK connector acts simultaneously as 
both input and output (see page 28).

You can use these jacks to hook up other 
PIONEER equipment, that has a CONTROL 
terminal, so that you can control them all by 
pointing the remote control(s) at one remote 
sensor.

Hook up antennas for the radio tuner built into 
the receiver here.

Use these terminals to input the signal from a 
DVD, CD player or any other kind of digital player. 
To be able to play Dolby Digital and other 
surround soundtracks you need to make digital 
connections. To do this use the digital terminals 
here. If you don't connect as per the default 
settings (see page 23) you need to complete 
“Assigning the Digital Inputs” on page 89.

Use either of these terminals to output the video 
signal to your TV(s), video projector(s) or 
monitor(s). The on-screen displays to setup the 
receiver will only be output through MONITOR 
OUT 1.

Use these terminals to output a digital signal to a 
DVD-R, CD-R, MD recorder or any other kind of 
digital recorder.

Use these terminals to output the audio signal 
from this amplifier to a different amplifier if that's 
how you choose to set up your system.

VSX-AX5i.book  Page 36  Friday, May 23, 2003  6:33 PM