Pioneer VSX-AX5i-G 用户手册

Fine Tuning Your System

Assigning the Component Video Inputs

This receiver has two component video inputs. Their default settings are video inputs for the DVD/LD (COMPONENT
VIDEO IN 1) and TV/SAT (COMPONENT VIDEO IN 2) functions, but you can reassign them if you want to use them
as video inputs for other receiver functions (for example a VCR).

See pages 16 and 17 for more on connecting equipment using component video cords.

1 Turn on the receiver and your TV,

press RECEIVER on the remote con-
trol.

2 Press the SYSTEM SETUP button.

3 Looking at the on-screen display on

your TV, use the

 buttons to select

INPUT ASSIGN. Press the ENTER
button.

4 Use the

 buttons to select

COMPONENT–IN SELECT then press
ENTER.

5 Use the

 buttons to select the

component video input you want to
reassign. Press the ENTER button.

6 Use the

 buttons to assign a

receiver function.

Choose between DVD/LD, TV/SAT, VCR1 and VCR2.

7 When you're finished use the



buttons to select EXIT and press
ENTER.

You will leave the COMPONENT–IN SELECT mode.

8 Use the

 buttons to select EXIT

and press ENTER. Then, use the



buttons to select EXIT and press
ENTER again.

This exits the SYSTEM SETUP mode and returns to
normal operation.

Memo:
If you connect any source component to the receiver using a
component video input, you should also have your TV
connected to this receiver's component video output.

3-8 2

VSX-AX5i.book Page 90 Friday, May 23, 2003 6:33 PM