Sony 4-144-907-43(1) 用户手册

D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\030CON_GB.fm

STR-DA3500ES
4-144-907-43(1)

B/b repeatedly to select 

V/v repeatedly to select 

The measurement results are saved.

b.

The exit screen appears.

The frequency response measurement result is not 
utilized in the following cases.
– The multi channel input is selected.
– “2ch Analog Direct” is being used.
– Dolby TrueHD signals with a sampling frequency 

of 176.4 kHz and higher are being received.

– PCM signals with a sampling frequency of 

176.4 kHz and higher are being received.

The size of a speaker (LARGE/SMALL) is 
determined by the low characteristics. The 
measurement results may vary, depending on the 
position of the optimizer microphone and speakers, 
and the shape of the room. It is recommended that 
you follow the measurement results. However, you 
can change those settings in the Speaker settings 
menu. Save the measurement results first, then try to 
change the settings if you want.

Full Flat

Makes the measurement of 
frequency from each 
speaker flat.

Engineer

Sets the frequency to one 
that matches that of the 
Sony listening room 
standard.

Front Reference Adjusts the characteristics 

of all the speakers to match 
the characteristics of the 
front speaker.

OFF

Sets the Auto Calibration 
EQ to off.