Sony 4-144-907-43(1) 用户手册
81
GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\090OTH_GB.fm
STRDA3500ESUC\090OTH_GB.fm
masterpage: Right
STR-DA3500ES
4-144-907-43(1)
4-144-907-43(1)
“B
RA
VIA” Sync
RA
VIA” Sync
fe
atur
es
Enjoying movies with the
optimum sound field
optimum sound field
(Theater Mode Sync)
Press the THEATRE button on the
remote of the receiver, TV, or the
Blu-ray Disc Player, while pointing
the remote toward the TV.
remote of the receiver, TV, or the
Blu-ray Disc Player, while pointing
the remote toward the TV.
The sound field switches to HD-D.C.S.
To return to the previous sound field, press the
THEATRE button again.
To return to the previous sound field, press the
THEATRE button again.
Note
The sound field may not switch depending on the
TV.
TV.
Tip
The sound field may be changed back to the
previous one when you change the TV’s input.
previous one when you change the TV’s input.
24p Auto Sound Sync
This function switches the sound field to HD-
D.C.S. automatically when 24p (24 frames per
second) signals are input from a playback
component, such as a Blu-ray Disc Player.
D.C.S. automatically when 24p (24 frames per
second) signals are input from a playback
component, such as a Blu-ray Disc Player.
Play back content containing 24p
signals on a playback component.
signals on a playback component.
The sound field switches to HD-D.C.S.
If you want the sound field to switch to HD-
D.C.S. automatically, set “24p Auto Sound
Sync” to “ON” (page 107).
If you want the sound field to switch to HD-
D.C.S. automatically, set “24p Auto Sound
Sync” to “ON” (page 107).
Notes
• This function does not work if a player is not
compatible with 24p Auto Sound Sync.
• When “Control for HDMI” is set to “ON”,
depending on the player, the sound field may not
switch to HD-D.C.S.
When “Control for HDMI” is set to “ON”, the
receiver detects the 24p signals via “BRAVIA”
Sync. Therefore, if a player that is not compatible
with “BRAVIA” Sync sends out 24p signals, the
receiver will not switch the sound field to HD-
D.C.S. In this case, set “Control for HDMI” to
“OFF”. When “Control for HDMI” is set to “OFF”,
the receiver detects the 24p signals by itself.
switch to HD-D.C.S.
When “Control for HDMI” is set to “ON”, the
receiver detects the 24p signals via “BRAVIA”
Sync. Therefore, if a player that is not compatible
with “BRAVIA” Sync sends out 24p signals, the
receiver will not switch the sound field to HD-
D.C.S. In this case, set “Control for HDMI” to
“OFF”. When “Control for HDMI” is set to “OFF”,
the receiver detects the 24p signals by itself.