Combi 8040 用户手册
30
Tighten vehicle belt to secure the base. Press down in
center of base to depress the vehicle cushion while
tightening vehicle belt (fig. e & f).
center of base to depress the vehicle cushion while
tightening vehicle belt (fig. e & f).
- When using a vehicle lap and shoulder belt, after
tightening lap portion of the belt, place shoulder belt
into slot in corner of base and allow shoulder belt to
rest against vehicle seat back (fig. g).
into slot in corner of base and allow shoulder belt to
rest against vehicle seat back (fig. g).
Check for secure installation. Pull base front to back and
left to right to check for secure installation (fig. h). Vehicle
lap belt MUST stay tight.
left to right to check for secure installation (fig. h). Vehicle
lap belt MUST stay tight.
If the vehicle lap belt does not stay tight or base cannot be
securely installed, see vehicle owner’s manual, “Vehicle
Seat Belts” section or move to a different seating location.
securely installed, see vehicle owner’s manual, “Vehicle
Seat Belts” section or move to a different seating location.
Attach car seat to base. Lift car seat to ensure it is properly
attached to the base (see “Attachment Of Car Seat To
Base” section).
attached to the base (see “Attachment Of Car Seat To
Base” section).
Recheck recline of car seat. Adjust if necessary
(see step 4).
(see step 4).
11
10
9
(fig. h)
(fig. f)
(fig. e)
Lap Belt
Lap and
Shoulder Belt
7
8
(fig. g)
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 31