Britax 85 SICT 用户手册

Using the LATCH Connectors
The LATCH connectors are located on the sides of the shell in the

storage slots. Store the LATCH connectors when not in use.
To remove the LATCH connector from the storage slot or lower

anchor:

Press and hold the red release

button.

Pull the LATCH connector

from the storage slot or lower

anchor.

To attach the LATCH connector to the storage slot or lower

anchor:
Firmly push the LATCH connector

into the slot or lower anchor until a

click is heard to store.
NOTE: The LATCH connectors

store in the slots upside-down.

Top

Using the Versa-Tether

WARNING!

• Attach the Versa-Tether only to tether anchors identified by

your vehicle manufacturer as tether anchorage points.

• If your vehicle does not currently have a tether anchor

attachment, refer to your vehicle owner’s manual or

contact your vehicle man u fac tur er for assistance. DO

NOT modify your vehicle without advice from your vehicle

manufacturer.

When using the child seat in harness mode:

• Britax recommends that the tether be used at all times

when installing the child seat. Using the tether will improve

the stability of your child seat and reduce the risk of injury.

Tether anchor locations vary

from vehicle to vehicle. Check

your vehicle owner’s manual

and look for the tether anchor

symbol shown in the diagram

to help identify where the top

tether anchor point is located

in your vehicle.

To remove the Versa-Tether from the storage clip:

Remove the webbing from the

elastic strap and loosen the

Versa-Tether.

Remove the Versa-Tether

hook from the storage clip.

To attach the Versa-Tether to the storage clip or a tether

anchor:

Firmly press the hook over the

storage clip or tether anchor

point.

Always attach the hook over

the anchor point.

IMPORTANT: Use the elastic strap

to contain extra webbing. Always

ensure any excess webbing is

contained within your vehicle.

Child Seat Functions