Britax 50 用户手册
10
11
Switchable Retractor in ALR with Sliding Latch Plate
3.
Has a latch plate that freely slides
a
along the vehicle belt webbing.
Has a retractor that can be
b
switched to function as an ELR
or an ALR by pulling the vehicle
belt fully out until a clicking
sound can be heard when
retracting.
To use a child seat with this type
*
of vehicle belt, you will need to
switch to the ALR mode or use the
locking clip (page 35).
Compatible Vehicle Seat Belts
NOTE:
The information in this section only applies to installation with
vehicle safety belts.
Vehicle seats and safety belts differ from vehicle to vehicle. Refer to
Vehicle seats and safety belts differ from vehicle to vehicle. Refer to
your vehicle owner’s manual for specific information about your vehicle
safety belts and their use with child seats.
Lap-Shoulder (3-Point) Belt
ALR (Automatic Locking Retractor) with Sliding Latch Plate
1.
Has a latch plate that freely slides
a
along the vehicle belt webbing.
Has a retractor that stops the
b
belt from being pulled out again
once the belt webbing has been
pulled out at least 24” (61 cm).
Tightens by feeding the
c
belt webbing back into the
retractor.
ELR (Emergency Locking Retractor) with Locking Latch Plate
2.
Has a latch plate that does not
a
allow the lap part of the belt to
become loose after it is buckled.
Has a retractor that locks only in
b
an emergency situation such as
sudden stop or crash.
Latch
Plate
Latch
Plate
Latch Plate
Vehicle Compatibility
Vehicle Compatibility