Motorola H555 用户手册

Your H555 headset is supplied with multiple 
earhooks. The earhook is attached onto a hinge pin, 
and is placed onto your ear when using your 
headset. To install an earhook on your headset: 

Open the attached 
earhook 90 degrees from 
the headset.

Gently lift and pull the
top of the earhook up
and off the upper hinge
pin. Then, pull it away to 
remove it.

Position the headset for 
right or left ear use (right 
ear use is displayed).

Hook the bottom of the 
earhook onto the lower 
hinge pin, then lift and pull 
the top of the earhook 
over the upper hinge pin.

2 Pull Earhook Up

Hinge Pin

1 Open Earhook

Once you have attached your desired 
earhook, follow these steps to wear your 
headset on your ear:

Open the attached 
earhook 45 degrees from 
the headset.

Loop the earhook over 
your ear.

Press earhook to your ear.

When worn, your headset 
will look like this on your 
head:

You can also change the orientation of the 
volume buttons on your headset. 

Turn the headset power off.

Press and hold the Volume button you 
want to assign as the "volume up" button 
and slide the switch toward the 
microphone. The indicator light is either 
steadily lit or flashing in blue. 

Slide
Switch

Volume

Buttons

• The essential requirements and
  other relevant provisions of Directive
  1999/5/EC.

• All other relevant EU Directives.

Product

Approval

Number

The above gives an example of a typical Product 
Approval Number.

You can view your product’s Declaration of Conformity 
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at 
www.motorola.com/rtte. To find your DoC, enter the 
product Approval Number from your product’s label in 
the “Search” bar on the web site.

Hereby, Motorola declares that this 
product is in compliance with: