Konica Minolta bizhub 180 用户手册
5
5.5 Selecting the Paper Source
5-22
bizhub 180
Be
for
e M
ak
in
g Co
pie
s
Cha
p
ter 5
5.5
Selecting the Paper Source
The paper used for making copies can be selected in two ways.
G
Auto Paper:
If the Auto Paper function is selected, the paper tray containing the most
suitable size of paper is selected based on the size of the document and the
specified zoom ratio.
If the Auto Paper function is selected, the paper tray containing the most
suitable size of paper is selected based on the size of the document and the
specified zoom ratio.
G
Manual paper selection:
The paper that you wish to use for copying can be selected.
The paper that you wish to use for copying can be selected.
To make copies using the Auto Paper function
1
Load the document into the Document feeder.
❍
Refer to “
2
Press the [Auto Paper/Auto Size] key
until the Auto Paper function is
selected.
until the Auto Paper function is
selected.
❍
Check that “AUTO” appears in the
bottom line of the screen.
bottom line of the screen.
3
If necessary, specify any other copy settings.
❍
Zoom (p. 5-30)
❍
Copy density (p. 5-36)
❍
Advanced Copy Operations (p. 6-1)
4
Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.
[Start] key.
✎
Note
If
“
APS SIZE ERROR
”
appears in the display immediately after the [Start] key
is pressed, no tray is loaded with paper of the most suitable size. Either load
paper with the appropriate size, or press the [Paper] key and select the desired
paper size, and then press the [Start] key again.
paper with the appropriate size, or press the [Paper] key and select the desired
paper size, and then press the [Start] key again.