Konica Minolta bizhub 180 用户手册
7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7
bizhub 180
7-5
U
til
it
y
M
o
de
–
C
opy
F
un
c
ti
ons
Chap
ter
7
7.2
Specifying Machine Settings (“MACHINE
SETTING” Menu)
SETTING” Menu)
From the “MACHINE SETTING” menu, the following machine settings can be
changed.
changed.
“MACHINE SETTING” menu:
No.
MACHINE SETTING
Description
1
AUTO PANEL RESET
This function can be used to set the length of time until the auto
panel reset operation is performed after copying or the last operation
is finished. When the auto panel reset operation is performed, the
Copy mode screen is automatically displayed.
• The manufacturer’s default setting is 1 min.
panel reset operation is performed after copying or the last operation
is finished. When the auto panel reset operation is performed, the
Copy mode screen is automatically displayed.
• The manufacturer’s default setting is 1 min.
2
ENERGY SAVE MODE
This function can be used to set the length of time that the machine
is idle before it enters Energy Saver mode.
• The manufacturer’s default setting is 15 min.
is idle before it enters Energy Saver mode.
• The manufacturer’s default setting is 15 min.
3
AUTO SHUT OFF
This function can be used to set the length of time until the machine
automatically turns off after the last operation is finished.
• The manufacturer’s default setting is “OFF”.
automatically turns off after the last operation is finished.
• The manufacturer’s default setting is “OFF”.
4
DENSITY (ADF)
This function is used to specify the density level when the optional
Document feeder is used.
Mode 1: For printing lighter copies of dark documents to avoid
darkening of copies.
Mode 2: For printing copies with same density as documents.
• The manufacturer’s default setting is “MODE1”.
Document feeder is used.
Mode 1: For printing lighter copies of dark documents to avoid
darkening of copies.
Mode 2: For printing copies with same density as documents.
• The manufacturer’s default setting is “MODE1”.
5
DENSITY (BOOK)
This function is used to specify the density level when a document
is placed on the Original glass and copied.
Mode 1: For printing copies with same density as documents.
Mode 2: For printing lighter copies of dark documents to avoid
darkening of copies.
• The manufacturer’s default setting is “MODE1”.
is placed on the Original glass and copied.
Mode 1: For printing copies with same density as documents.
Mode 2: For printing lighter copies of dark documents to avoid
darkening of copies.
• The manufacturer’s default setting is “MODE1”.
6
PRINT DENSITY
The print density can be set to one of five settings.
• The manufacturer’s default setting is
• The manufacturer’s default setting is
.
7
LCD CONTRAST
This function can be used to adjust the contrast of the Control panel
display.
• The manufacturer’s default setting is
display.
• The manufacturer’s default setting is
.
8
LANGUAGE
This function can be used to set the language of the display and the
printed reports.
printed reports.