Xerox 5000 用户手册

DocuColor 5000 Administrator Guide

3-26

3. Profiles

The Second Bias Transfer Belt is where the image is transferred 

from the belt to the paper. The Second Bias Transfer Belt feature 
is normally used with heavier weight paper, such as 220 g/m

2

 and 

greater, 10 pt, or 12 pt, which are just three examples; however 

there are times when it is also used with lighter weight paper as 

well.
When using either heavier or lighter weight paper, you may want 

or need to adjust Side 1 for all 1-sided jobs. If defects continually 

occur in a printed job when using heavier weight paper, perform 

the following steps to determine if a Custom Paper Profile with 

Side 1 or Side 2 (2nd Bias Transfer Belt) adjustments are 

appropriate. 

If the job is printed face down or 1-N, check Side 1 for 
defects on the topside (upper portion) of the stacked sheets, 

and check Side 2 for defects on the downside (lower 

portion) of the stacked sheets.

If the job is printed face up or N-1, check Side 2 for defects 
on the topside (upper portion) of the stacked sheets, and 

check Side 1 for the downside (lower portion) of the stacked 

sheets.