Roland RD-300SX 用户手册
50
Connecting to Your Computer via USB (USB Mode)
When a computer is connected to the USB connector, you can
determine the USB driver to be used as follows:
determine the USB driver to be used as follows:
1.
Press [EDIT].
The indicator lights, and the RD-300SX switches to Edit mode.
2.
Press [INC] or [DEC] to select “System,” then press
[ENTER].
[ENTER].
fig.disp.SYS
3.
Press [RHY/GM2].
4.
Press [INC] or [DEC] to set the value.
5.
After changing settings, turn the power off and then on
again.
again.
There is no need to use the Write procedure for the USB Driver
settings.
settings.
You can use a USB connector to connect the RD-300SX to your
computer. For more details, refer to the separate “USB Installation
Guide.”
computer. For more details, refer to the separate “USB Installation
Guide.”
*
Connecting your computer to the RD-300SX for the first time requires
installation of the “USB Driver” (on the included CD-ROM) to the
computer. For more details, refer to the separate “USB Installation
Guide.”
installation of the “USB Driver” (on the included CD-ROM) to the
computer. For more details, refer to the separate “USB Installation
Guide.”
*
Only MIDI data can be transmitted using USB.
921
*
To prevent malfunction and/or damage to speakers or other devices,
always turn down the volume, and turn off the power on all devices
before making any connections.
always turn down the volume, and turn off the power on all devices
before making any connections.
*
USB cables are not included. Consult your Roland dealer if you need
to purchase.
to purchase.
*
Use a USB cable no longer than 3 meters.
*
Turn on the power to the RD-300SX before starting up MIDI
applications on the computer. Do not turn the RD-300SX on or off
while any MIDI application is running.
applications on the computer. Do not turn the RD-300SX on or off
while any MIDI application is running.
*
Do not connect or disconnect the USB cable while the RD-300SX’s
power is on.
power is on.
*
If not using USB, disconnect the USB cable from the RD-300SX.
*
If, during the transmission/reception of data, the computer switches to
energy-saving mode or suspended mode, or if the RD-300SX’s power
is switched on or off, the computer may freeze, or the RD-300SX’s
operation may become unstable.
energy-saving mode or suspended mode, or if the RD-300SX’s power
is switched on or off, the computer may freeze, or the RD-300SX’s
operation may become unstable.
*
When using your computer’s sequencer software to record
RD-300SX performances, we recommend setting the sequencer
software’s Soft Thru to “OFF.”
RD-300SX performances, we recommend setting the sequencer
software’s Soft Thru to “OFF.”
Switching USB Drivers
What is the USB MIDI Driver?
The USB MIDI Driver is a software which passes data between
the RD-300SX and the application (sequencer software, etc.) that
is running on the USB-connected computer.
the RD-300SX and the application (sequencer software, etc.) that
is running on the USB-connected computer.
The USB MIDI Driver sends data from the application to the
RD-300SX, and passes data from the RD-300SX to the
application.
RD-300SX, and passes data from the RD-300SX to the
application.
fig.05-01
Application
USB
Driver
Computer
USB connector
USB cable
USB connector
RD-300SX
Display
Value
Description
Original
Select this when using the sup-
plied driver with a USB connec-
tion.
plied driver with a USB connec-
tion.
Generic
Select this when using a generic
USB driver included with the OS
with a USB connection.
USB driver included with the OS
with a USB connection.
Exchanging MIDI Messages
with Your Computer
RD-300SX_e.book 50 ページ ２００５年４月２０日 水曜日 午後３時４０分