Lexmark 41H0100 用户手册
Use
To
Off
Use factory default settings. This setting supports the
performance specifications of the printer.
performance specifications of the printer.
Note: Selecting Photo from the printer driver may disable
Quiet Mode and provide better print quality and full
speed printing.
Quiet Mode and provide better print quality and full
speed printing.
2
Press
.
Adjusting Sleep mode
To save energy, decrease the number of minutes the printer waits before it enters Sleep mode.
Available settings range from 1–180 minutes. The factory default setting is 30 minutes.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Reports menu. The IP address appears as
four sets of numbers separated by periods, such as 123.123.123.123.
four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Timeouts.
3
In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.
4
Click Submit.
Using the printer control panel
1
From the printer control panel, navigate to:
> Settings > Settings >
> General Settings >
> Timeouts >
> Sleep Mode >
2
Press the left or right arrow button to select the number of minutes you want the printer to wait before it enters
Sleep mode.
Sleep mode.
3
Press
.
Using Hibernate Mode
Hibernate is an ultra
‑low power operating mode. When operating in Hibernate mode, all other systems and devices
are powered down safely.
Note: The Hibernate and Sleep modes can be scheduled.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Using C746x
74