John Lewis JLBIDOS904 用户手册

下载
页码 32
Installation  
 
The oven must be installed according to the 
instructions supplied. 
 
Technical Data
 
Voltage: 
230-240 Volts AC 50Hz 
Wattage: 5.0-5.5kW 
Height: 897 
mm 
Width: 592 
mm 
Depth: 563 
mm 
(excluding handles and knobs) 
Weight: 
  55kg 
 
 
 
 
 
THIS OVEN MUST BE EARTHED 
 
Electrical Requirements 
This appliance must be installed by a qualified 
electrician/competent person. Safety may be 
impaired if installation is not carried out in 
accordance with these instructions. 
Do not remove the screws from the earth tab 
extending from the oven mains terminal block (Fig. 
1). 
Before connecting the appliance make sure that the 
voltage of your electricity supply is the same as that 
indicated on the rating plate. This is situated on the 
lower front frame of the appliance and can be seen 
upon opening the door.  Alternatively the rating 
plate may also be found on the back or top of some 
models (where applicable). 
Do not alter the electrical circuitry of this appliance. 
Electrical Connection 
• 
There are three possible ways to connect your 
appliance. In each case the appliance should be 
operated using at least 6mm
twin core and 
earth PVC insulated.  Please choose from the 
most appropriate after reading the different 
methods:- 
a)  By connecting the appliance to a cooker point  
(having a double pole isolating switch with at 
least 3mm contact separation in all poles and 
neutral) and protected with a fuse or miniature 
circuit breaker at your mains fuse box. 
Subject to Regional Electricity Companies 
regulations, if you wish to connect the 
oven and hob to the power supply you 
may use one of the following two 
methods:- 
 
This appliance complies with: 
European Council Directive 
73/23/EEC. 
EMC Directive 89/336/EEC. 
CE Marking Directive 93/68/EEC.  
Energy Label Directive 
2002/40/EC. 
Electrical Connection 
Fig.1