3com 2200 用户手册

To display the roving analysis configurations, enter the following from the 
top level of the Administration Console:

The configurations are displayed as shown in the following example:

Ethernet ports configured as analyzer ports:

Ethernet Port

Address

9

00-80-3e-0a-3b-02

Ethernet ports being monitored:

Ethernet Port

Address

16

00-80-3e-0a-3b-02

You can have as many as 16 network analyzers connected to a system (the 
maximum number of Ethernet ports on a system). For a more accurate 
analysis, attach the analyzer to a dedicated Ethernet port instead of through 
a repeater.

To add analyzer ports:

1 From the top level of the Administration Console, enter:

2 Press Return to select Ethernet as the port type.

3 Enter the number of the Ethernet port to which the network analyzer is 

attached.

The MAC address of the analyzer port is displayed. You will need this 
information for setting up the port you want to monitor. See the following 
example:

Select Ethernet port (1-16): 

Analyzer port address is 00-80-3e-0a-3b-02

If your port selection is not valid, you receive one of the following 
messages:

Error adding analyzer - monitoring already configured on 

this port

Error adding analyzer - analyzer already configured on this 

port

system
ethernet
fddi
bridge
ip
snmp

➧

analyzer
script
logout

➧

display
add
remove
start
stop

system
ethernet
fddi
bridge
ip
snmp

➧

analyzer
script
logout

display

➧

add
remove
start
stop