Thermador PORS663L/R 用户手册
16
17
OPERATION
OPERATION
4. Set the cooking duration you want by using – or +.
5 seconds after the last change, the “cook time”
indicator I will stop flashing, and the time of day will
be displayed.
Note: Do not forget to add preheating time if necessary.
Setting the cooking end time
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature.
The oven indicator light will glow and the heating
source will come on.
3. Press “mode“ until the “end time” indicator I
begins flashing.
4. enter the time of day you want to finish cooking
by pressing – or +. 5 seconds after the last change,
the “end time” indicator I will stop flashing and the
current time of day will be displayed.
Setting the delayed start cooking time
1. Program the “cook time“ and “end time“ as described
in the relevant sections. Once both the “cook time“ and
“end time“ have been set, the “cook time“ and “end
time” indicators will stop flashing and the current time
of day will be displayed.
To check or cancel settings
1. To check your settings, press “mode” until the setting
you want is displayed. A red light will flash next to the
mode (cook time, end time etc) that is currently on display.
2. To cancel “delayed start” press “mode” until a light
flashes next to “cook time”. Press and hold “–” until
the clock no longer reverses (“0:00” and you will hear
a beep). If you have left the temperature and function
knobs at a setting the oven will start once the “end
time” light stops flashing.
3. To cancel “auto off” press “mode” until a light flashes
next to “cook time”. Press and hold “–” until the clock
no longer reverses (“0:00” and you will hear a beep).
This automatically cancels “delayed start”. If you
have left the temperature and function knobs at a setting,
the oven will start once the “cook time” light stops
flashing. Because you have cancelled “auto off” the
oven will continue to heat until you manually turn it off.
On completion of cooking
The oven will turn off, the timer will beep and the “end time”
and/or “cook time” indicators will flash.
1. Turn the function and temperature controls to the off position.
2. Press “+” or “–” or “mode” to stop the timer from beeping.
Touch Control
Setting the time of day
After the appliance has been electrically connected the
“set clock” symbol and “timer arrow will flash on the
clock display.
1. To set the time of day in hours and minutes press the
– or +. 5 seconds after the last change the “timer arrow”
will disappear, confirming the time has been set.
NOTE: The clock has a 24-hour display.
Change the time of day (Daylight saving)
1. Switch off the appliance by pressing “on / off”.
2. Press “Timer” as many times as necessary until the
“set clock” symbol and “timer arrow flash on
the clock display.
3. Press “+” or “–” to change the time. 5 seconds after the
last change the “set clock” symbol and “timer arrow
will disappear, confirming the time has been set.
Setting the oven function
1. Switch on the appliance by pressing the “on / off”.
The oven lights will light.
2. Press the “function” as many times as necessary until
the desired function appears. The suggested cooking
temperature appears in the display and the degrees
symbol “°” flashes. If the suggested temperature is not
changed within approximately 5 seconds the degrees
symbol “°” stops flashing and the oven begins to heat.
The suggested temperature display is replaced with
the oven centre temperature and a thermometer icon.
The thermometer icon rises slowly, indicating the
degree to which the oven is currently being heated.
Changing the oven temperature
1. Press the – or +, to decrease or increase the temperature.
NOTE: The temperature can only be adjusted when
the degrees symbol “°” is flashing. The temperature
setting changes in increments of 5°C. To change the
temperature after the degrees symbol “°” stops flashing,
press the “Function” and then press the – or + to
change the temperature.
2-hour “Auto Off” timer
The 2-hour timer features an automatic oven “cut off”.
This means that a cooking period of up to 120 minutes
can be set. When the timer has counted back to “Auto off”
a bell will sound and the oven will automatically switch off.
Once automatic baking is complete, return to manual
operation by setting the timer to the ‘Off’ mark.
NOTE: It is not recommended to use this timer for short
durations (e.g. boiling eggs).
ELECTRONIC CLOCK
Touch Control (POR667 and POR668 models only)
General features
Your touch control clock has the following features:
• Timer – allows you to set a countdown time that will
beep when the set time has elapsed.
• Cooking duration – You can set a cooking duration.
A timer will count down the preset cooking time, beep
when the time has elapsed and turn the oven off.
• end cooking time – you can set a cooking finish time.
A timer will count down the preset cooking time, beep
when the finish time has been reached and turn the
oven off.
• Delayed start cooking time – You can combine the
cooking time and stop cooking time to switch the oven
on and off at a specific time during the day.
Note: Your touch control clock only operates with
your main oven.
Setting the time of day
You must set the time of day before you can operate your
appliance. When power is supplied to your oven “12.00“
will be displayed and the “clock” indicator I will flash.
1. To set the time of day in hours and minutes, press – or +.
5 seconds after the last change, the “clock” indicator I
will disappear, confirming the time has been set.
Note: The clock has a 24-hour display.
Change the time of day (Daylight saving)
1. Press “mode” until the “clock” indicator I begins flashing.
2. Press – or + to change the time. 5 seconds after the
last change, the “clock” indicator I will disappear,
confirming the time has been set.
Setting the timer
1. Press “mode“ until the “timer” indicator I begins flashing.
2. Set the countdown time you want by using – and +.
5 seconds after the last change the “timer” indicator I
will stop flashing, confirming the timer has been set.
3. To stop the beeper, press –, + or “mode”.
Setting the cooking duration
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature.
The oven indicator light will glow and the heating
source will come on.
3. Press “mode“ until the “cook time” indicator I
begins flashing.
OPERATING THE ELECTRONIC CLOCK
MODEL POR783 & POR883
PROGRAMMABLE CONTROLLER
PROGRAMMABLE CONTROLLER
COOKING WITH YOUR TIMER