Radio Shack HTX-200 用户手册
3
Paging Tones— you can set the radio to play a short, selectable
paging tone when it transmits, and sound the same tone when it
receives a signal.
paging tone when it transmits, and sound the same tone when it
receives a signal.
Signal Strength Indicator — a graduated bar shows the relative
strength of the received signal.
strength of the received signal.
Time-Out Timer — lets you set a maximum transmission time in-
terval from 0 to 16
terval from 0 to 16
1
/
2
minutes in 10-second increments.
Busy Channel Lock Out — prevents transmitting while the se-
lected channel is receiving a signal.
lected channel is receiving a signal.
TX Delay — reduces squelch tail when communicating using
CTCSS.
CTCSS.
Scan Delay — delays the restart of scanning when the radio
locks onto a channel.
locks onto a channel.
Earphone Jack and External Microphone Jack — let you con-
nect an optional earphone, external microphone, or combination
headset, for more flexible operation.
nect an optional earphone, external microphone, or combination
headset, for more flexible operation.
External Power Jack — lets you use an external power source
for maximum output.
for maximum output.
30 Memory Locations — let you store up to 30 frequencies and
other settings.
other settings.
Back Light — makes your transceiver easy to operate in low-
light situations.
light situations.
Key Lock — lets you lock the transceiver’s keys to prevent acci-
dentally changing settings.
dentally changing settings.
We recommend you record your transceiver’s serial number
here. The number is on the transceiver’s back panel.
here. The number is on the transceiver’s back panel.
Serial Number ____________________________
19-1102RPO.fm Page 3 Friday, June 25, 1999 11:17 AM