Cooper Lighting 635-14 产品宣传页

DIFFUSER

FRAME

CIRCLE STRAP

"J" BOX

PRESET

SCREWS

HEX

NUTS

(by others)

Preset longer 8/32 screws to CIRCLE STRAP and attach strap to J-box 

1.

(by others) with 1" long 8-32 screws, making preset screws face out 

from J-box.

Attach ground wire to CIRCLE STRAP with green ground screw.

2.

Connect black & white wires from luminaire to black & white wiresfrom 

3.

supply circuit with U.L. approved wire connectors.

Pull up on DIFFUSER to remove from frame.

4.

Place luminaire over preset mounting screws on CIRCLE STRAP and 

5.

attach with HEX NUTS.

Install lamp to test luminaire before continuing, remembering to turn 

6.

power on for testing only, then turn power off.

Make sure luminaire is level on wall.

7.

Replace DIFFUSER in frame.

8.

11509440

1141 Marina Way South, Richmond, CA  94804 Phone: (510)234-2370   Fax:(510) 234-2371

NOTICE:
      For proper installation, have a qualified

         electrician install this product.

    

 Before installation of any luminaire onto an

         electrical junction box, be sure to disconnect

         power.

    

 This luminaire must be wired and grounded in

         accordance with the National Electrical Code,

         local codes, and ordinances.

    

 Wire supply connections must be made with U.L.

         approved connectors.

    

 Check that luminaire voltage and building

         voltage are the same.

11/08/2007

B

11509440