Cooper Lighting P4GE-MX 用户手册
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269
IMI-623 ACF050370
Small Falcon
Sheet 1 of 7
1/26/05
IMI-623
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING LUMINAIRE.
RETAIN FOR FUTURE REFERENCE.
General: Upon receipt of luminaire thoroughly inspect for
any freight damage, which should be brought to the
attention of the delivery carrier. Compare the catalog
description listed on the packing slip with the luminaire label
on the housing to assure you have received the correct
merchandise.
any freight damage, which should be brought to the
attention of the delivery carrier. Compare the catalog
description listed on the packing slip with the luminaire label
on the housing to assure you have received the correct
merchandise.
Safety: This luminaire must be wired in accordance with
the national electrical code and applicable local codes
and ordinance. Proper grounding is required to insure
personal safety. Carefully observe grounding procedure.
All work should be done by a qualified electrician.
the national electrical code and applicable local codes
and ordinance. Proper grounding is required to insure
personal safety. Carefully observe grounding procedure.
All work should be done by a qualified electrician.
WARNING:
Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing
or servicing.
or servicing.
WARNING:
Risk of Burn. Disconnect power and allow fixture to cool before changing lamp or
handling fixture.
handling fixture.
WARNING:
Risk of Fire. These luminaires are intended for outdoor lighting service and should
not be used in areas of limited ventilation or in high ambient temperature enclosures.
not be used in areas of limited ventilation or in high ambient temperature enclosures.
WARNING:
Risk of Fire. Supply conductors (power wires) connecting the fixture must be rated
minimum 60°C. If uncertain, consult an electrician.
minimum 60°C. If uncertain, consult an electrician.
FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.
IMPORTANT: READ CAREFULLY BEFORE INSTALLING LUMINAIRE. RETAIN FOR FUTURE USE.
APPLICATIONS:
• Suitable for Wet & Damp Location.
• Use lamp type suitable for this luminaire. Consult re-lamp label and lamp instructions for details.