Cooper Lighting M2N-E SLI 用户手册
2.
Visor and Non-Visor
Do not
performed by a certified electrician.
work must meet local/national codes and be
Warning
: Before starting any work ensure
that all sources of power are turned off. All
mount fixtures vertically.
Installation Instructions
1.
Sheet 1 of 3
Roundel, XL
IN/OUTDOOR
P1R
(Pendant, 1-way, Remote)
ADY080866 REV A(ECN080377)
Hex end bolt
All extra large fixtures require additional bracing/structure around J-box to support fixture.
End cap
3/8-16x1"
(by others)
Mounting plate
J-box
Canopy
dependant on order
Pendant length
plate
1-way Yoke
Yoke arms
Fixture door
Electrical cover
Exploded View and Part Call-Out
(x2)
Securing Pendant to Structure in Ceiling
(x2)
Hex bolt
Securing Yoke to Pendant
Attention:
spacer
Aiming screw
1/4-20 x 4"
1/4-20 x1"
Aiming screw
(x2)
Aiming screw
(x2)
1/4-20 x1"
Button socket screws
(x4)
Button socket screws
(x4)
yoke.
and secure using both 1/4-20 x 4" hex bolts.
After securing arms, slide 1-way yoke assembly onto pendant
2.
Yoke arms
Using all four 1/4-20 x1" screws, secure yoke arms to 1-way
yoke
1-way
1.
1/4-20 x 4"
Hex bolt
(x2)
Hex bolt
(x2)
Pan head screws
#10-32 x 1/2"
(x2)
(by others)
J-box
plate
Mounting
(by others)
Canopy
Appropriate fasteners
1. Loosen both #10-32 x1/2" Pan head screws and allow canopy
to slide down pendant.
2. Feed power wire from j-box into pendant, ensure wire reaches
electrical cover plate on base of pendant.
3. Using appropriate fasteners(by others), secure mounting plate
to structure/bracing around J-box.
to slide down pendant.
2. Feed power wire from j-box into pendant, ensure wire reaches
electrical cover plate on base of pendant.
3. Using appropriate fasteners(by others), secure mounting plate
to structure/bracing around J-box.