Regency U39-NG1 用户手册

Regency

®

 U39 ULTIMATE Direct Vent Freestanding Gas Stove

16) Pull off the pilot cap to expose the pilot 

orifi ce.

17) Unscrew the pilot  orifi ce with the allen 

key and replace with the LPG pilot 
orifi ce in the kit.

19) Reinstall new burner orifi ce LPG 

stamped #50 and tighten.

20) Reverse steps 3) to 2).

21) Attach the label  "This unit has been 

converted to LPG" near or on top of the 
Serial # decal.

22) Replace yellow "NG" label with red 

"LPG" label.

15) Re-assemble the black protection cap 

(Fig. 6).

appropriate for the gas type. 

1)  Remove the back pedestal cover by 

unscrewing the 4 screws.

2)  Remove the front control panel by 

unscrewing the 6 screws.

4)  Plug up the Piezo Ignitor mounting hole 

with the plastic plug.

18) Remove burner orifi ce with a 1/2" 

wrench while using a 9/16" wrench to 
hold onto the elbow behind the orifi ce, 
then discard the orifi ce.

14) Verify that if the conversion is from 

NG to LPG, the screw  must be re-
assembled with the red o-ring visible 
(Fig. 5).

LPG Configuration

Red o-ring visible

3)  Unplug the Piezo Ignitor wire and 

remove Piezo Ignitor from the control 
panel.

5)  Connect the DC spark generator wires 

to the SIT Valve with the screw, which is 
provided in the kit.