Blue Sea Systems PN 8408 用户手册

  Apply a label for each circuit from the label set provided. If the  

 

  appropriate label is not included, extended label sets are available  
  through retail suppliers, and over 500 individual labels are available  
  directly from Blue Sea Systems. Please go to www.bluesea.com to  
 order stock or custom labels for specific applications.

 

Fasten the panel to the mounting surface using the screws provided.

 ]

Reconnect the main positive cable to the battery terminals and turn  

 

 

the main switch on to supply power to the panel. Turn on all branch  

 

 

circuits and test the voltage at the panel. Compare this voltage to  

 

 

the battery terminal voltage to determine that the voltage drop is  

 

 

within 3%. With all branch circuits still on, test the voltage at one  

 

 

device on each circuit to determine that there is a 3% or 10% drop  

 

 

as is appropriate.

 ]

Connect the vessel’s shore power and verify the Reverse Polarity  

 

 

light is not illuminated. If the red Reverse Polarity light is on then  

 

 

either the hot and ground or the hot and neutral wires have been  

 

 

crossed. Starting at the panel, trace the connections  back as far as  

 

 

necessary to locate the error.

]

 Using a multimeter where the power source is connected to the panel  

    verify:

 PN 8408 / PN 3408—120 Volt AC
    a.  120 volts between hot and neutral
      (nominal, this may vary depending on source voltage) 
    b.  120 volts between hot and ground.
    c.  0 volts between neutral and ground

 PN 8508 / PN 3508—230 Volt AC
    a.  230 volts between hot and neutral
      (nominal, this may vary depending on source voltage) 
    b.  230 volts between hot and ground.
    c.  0 volts between neutral and ground.

]

 Turn on each branch circuit to verify power to each circuit.

]

 Review the AC and DC meter installation and operation manual.   

    Reference the Theory of Operation, Use, Installation Overview and  
    operations sections. Verify meter functions.

• American Boat and Yacht Council (ABYC)
  Standards and Recommended Practices for Small Craft sections:
  E-1, E-3, E-9.
• United States Coast Guard 33 CFR Sub Part 1, Electrical Systems

• Calder, Nigel (2005). Boatowner’s Mechanical and Electrical Manual 
  (3d ed). Camden, ME: International Marine / McGraw-Hill.
• Wing, Charlie (2006). Boatowner’s Illustrated Electrical Handbook 
  (2d ed). Camden, ME: International Marine / McGraw-Hill.

• 360 Panel System
• Battery Management Solutions
• AC and DC circuit protection devices
• WeatherDeck waterproof circuit breaker panels
• Fuses, fuse blocks, and BusBar
• Analog and digital meters

9089 Rev. 006

Page 3 of 4