Philips DVP3980/12 用户手册

36

(underlined options are the factory default settings)

This setting is only required if you have connected the audio 
output of this unit to a stereo device or TV using the analog 
output socket. 

{ LT/RT } 

–  The connected device has a built-in 

Dolby Pro Logic decoder. It can deliver 
the surround sound through the two 
speakers.

{ Stereo } 

–  The connected device can only output 

stereo audio through two speakers.

{ V SURR } 

–  For virtual surround sound effects.

This setting is only required if you have connected the audio 
output of this unit to an amplifi er/receiver using the digital 
output socket.  

{ Digital Output } – 

{ 

Off } 

Disable digital audio output. Select this 
if you are using the analog audio 
sockets to connect this unit to a TV or 
Stereo system.

  

{ 

ALL } 

 

 

The connected device supports multi-
channel audio formats. The digital audio 
format will be output as on disc.

 

 

{ PCM Only }

 

 

The connected device does not support 
multi-channel formats. All audio signals are 
downmixed to PCM format (2-channel).

{ LPCM Output } – 

{ 

48 K } 

Select this to play disc recorded at 
sampling rate of 48kHz.

 

 

{ 96 K } 

 

 

Enable 96 kHz output on digital audio if 
the amplifi er/receiver is compatible 
with high sampling rate audio (88.2 / 96 
kHz). However, if the sound output is 
distorted or there is no sound, change 
the setting to ‘48 K’.

–  Digital Audio Setup setting is only available if HDMI Audio is set 
to { Off }.

–  LPCM Output can only be selected when { PCM Only } is 
activated. The higher the sampling rate, the better the sound quality.

 

Digital Audio Setup