Philips DMVC300K/00 用户手册
Recharging the battery
1
Make sure the camera is turned off.
2
Turn on the PC.
3
Connect the USB plug of the USB/Microphone cable to the USB port of the PC.
4
Place the camera’s USB connector on the USB connector in the desktop stand. Push it down
gently until it clicks into position.
gently until it clicks into position.
> You will hear a beeping sound, the display lights up blue and the Charge LED lights up red.
The battery will now be recharged.
> It will take four hours to fully recharge the battery. When the battery is fully recharged the
Charge LED will go out.
Notes!
– Charge the camera in time! When the battery is empty all photos in the camera memory will be lost..
– When the battery is almost empty, the camera starts beeping and
– Charge the camera in time! When the battery is empty all photos in the camera memory will be lost..
– When the battery is almost empty, the camera starts beeping and
appears on the display.
ENGLISH
17
DMVC300K_Fun_01 Eng.1.qxd 25-03-2004 12:44 Pagina 17